Luma Replacement Litter Mat: Fit, Cleaning and When to Swap

Quick answer

Use the Luma Replacement Litter Mat as a direct swap for the mat that came with your Luma Smart Litter Box. Clean it weekly with a gentle rinse and air-dry, and replace it when the non-stick surface stops releasing litter or the edges no longer sit flat.

How to fit, clean and swap the Luma Replacement Litter Mat

1. Remove the old mat and inspect the base: Lift the existing mat out of the Luma Smart Litter Box entry area. Wipe away loose litter and check for urine residue or stuck clumps underneath. Common mistake: placing the new mat over debris, which prevents it from lying flat and traps odor. If the base is damp, let it dry completely before fitting the replacement.
2. Position the replacement mat flush with the entry: Lay the Luma Replacement Litter Mat so its edges sit flat against the floor and the mat meets the box entry without a gap. Press down along the perimeter. Common mistake: leaving a curled edge that cats step over, which defeats tracking control. A mat that still curls after pressing may need a few hours to relax; avoid taping or trimming it.
3. Shake out loose litter daily: Pick up the mat by opposite corners and shake it into a waste bag. Do this before it becomes heavy with litter. Common mistake: shaking inside the house near the box, which spreads dust back onto the mat and floor. Daily shaking is the single biggest factor in keeping the non-stick surface effective.
4. Rinse weekly with water only: Take the mat outside or to a utility sink and rinse both sides with cool water. Use a soft brush only on stubborn spots. Common mistake: using bleach, ammonia, or abrasive cleaners, which can break down the non-stick and scratch-resistant surface. If odor persists after a plain rinse, check the box base and litter, not just the mat.
5. Air-dry completely before refitting: Stand the mat on edge or lay it flat in a ventilated area until no moisture remains on either side. Common mistake: refitting a damp mat, which encourages litter to stick and can cause seepage underneath. A second mat lets you rotate one out for drying without leaving the entry bare.
6. Decide when to swap: Replace the mat when litter no longer releases after a rinse, when scratches have become deep grooves that hold odor, when the anti-leak layer is torn, or when the edges stay curled despite flattening. Common mistake: waiting for visible holes; loss of non-stick performance happens before the mat looks ruined. Keep a note of the swap date so you can judge wear against your own cleaning routine.

Product facts

• Luma Replacement Litter Mat: Durable, non-stick mat made for the Luma Smart Litter Box; scratch-resistant and anti-leak. The non-stick and anti-leak design means you can rinse it rather than scrub it, and it protects the floor beneath the box from seepage.