Jak skonfigurować i używać inteligentnego karmnika Granary z podwójną miską

Szybka odpowiedź

Aby skonfigurować Granary Smart Feeder z podwójną miską, rozpakuj i umieść karmnik, pobierz aplikację Petlibro, podłącz karmnik do Wi-Fi i skonfiguruj harmonogram karmienia. Cały proces trwa zwykle około 10 minut, a aplikacja prowadzi Cię przez każdy krok.

Konfiguracja inteligentnego karmnika po raz pierwszy może wydawać się nieco przytłaczająca, ale Granary Smart Feeder z podwójną miską został zaprojektowany tak, aby proces ten był prosty. Niezależnie od tego, czy używasz go do suchej karmy, czy do mokrej, kroki są podobne, a ten przewodnik przeprowadzi Cię przez każdy z nich.

Omówimy wszystko, od rozpakowania po podłączenie aplikacji, a także typowe błędy, których należy unikać po drodze. Na koniec Twój karmnik będzie działał płynnie, a Twoje zwierzę będzie jadło o stałych porach.

Zanim zaczniesz: co znajduje się w pudełku

Po otwarciu pudełka powinieneś znaleźć podstawę karmnika, pojemnik na karmę lub tackę (w zależności od wersji suchej lub mokrej), zasilacz i instrukcję obsługi. Niektóre modele mogą również zawierać woreczek z żelem krzemionkowym, aby utrzymać suchą karmę świeżą – jeśli tak jest, odłóż go na później.

Poświęć chwilę na sprawdzenie wszystkich części pod kątem uszkodzeń i upewnij się, że niczego nie brakuje. Jeśli masz Granary 2 Series, pamiętaj, że zawiera kamerę i funkcje rozpoznawania AI, ale podstawowy proces konfiguracji jest taki sam. Sprawdź również, czy Twój karmnik wymaga baterii czy podłączenia przewodowego; większość modeli Granary jest z obsługą Wi-Fi i wymaga podłączenia do prądu.

• Zachowaj oryginalne opakowanie, dopóki nie potwierdzisz, że wszystko działa.
• Przeczytaj instrukcję, nawet jeśli jesteś obeznany z technologią – niektóre modele mają szczególne wymagania dotyczące umieszczenia.

Krok 1: Pobierz aplikację Petlibro i utwórz konto

Aplikacja Petlibro jest dostępna na systemy iOS i Android. Wyszukaj „Petlibro

Once you're logged in, tap the '+' icon to add a new device. The app will ask you to select the product type—choose 'Auto Feeder' and then select your specific model, such as 'Granary Smart Feeder' or 'Granary 2'. If you're unsure which model you have, check the bottom of the device or the manual.

• Make sure your phone's Bluetooth is on—some models use Bluetooth for initial pairing.

Step 2: Connect the Feeder to Wi-Fi

Place the feeder near your Wi-Fi router during setup to ensure a strong signal. Plug in the feeder and wait for the LED indicator to blink, which signals it's in pairing mode. If it doesn't blink, press and hold the reset button (usually on the back or bottom) for 5 seconds.

In the app, enter your Wi-Fi credentials. The feeder only supports 2.4GHz networks, so if you have a dual-band router, make sure your phone is connected to the 2.4GHz network before entering the password. The app will then attempt to connect—this can take up to a minute.

• If the connection fails, move the feeder closer to the router and try again.
• Double-check that your Wi-Fi password is correct and that you're on the 2.4GHz band.

Step 3: Fill the Hopper or Tray

Once connected, you can fill the feeder. For dry food models, open the hopper lid and pour in kibble. Make sure not to overfill—leave some space for the auger to rotate freely. For wet food models like the Polar Smart Wet Food Feeder, place the refrigerated tray inside and ensure it's properly seated.

If you're using a desiccant bag, place it inside the hopper to absorb moisture and keep the kibble fresh. The Granary Smart Feeder comes with a desiccant slot for this purpose. Close the lid securely to prevent pests and keep food fresh.

• Avoid filling the hopper to the very top—this can cause jams.
• For wet food, always check the tray is clean before inserting a new portion.

Step 4: Set Up a Feeding Schedule in the App

In the app, navigate to the 'Schedule' section and tap 'Add Schedule.' You can set specific times for each meal and portion sizes. For dry food, portions are usually measured in 10-gram increments; for wet food, you may have preset portions based on the tray size.

If you have the Granary 2 Series, you can also enable AI recognition to track which pet eats and how much. This is useful for multi-pet households. You can set up to 10 personalized meals or snacks per day, depending on your model.

• Start with a simple schedule (e.g., two meals a day) and adjust based on your pet's needs.
• Use the 'Manual Feed' button for occasional treats without changing the schedule.

Step 5: Test the Feeder and Monitor

Before leaving the feeder to work on its own, do a test run. Use the 'Manual Feed' option in the app to dispense a small portion and watch to ensure it works correctly. Check that the food drops into the bowl and that there are no jams or misalignments.

After the test, you can monitor your pet's eating habits through the app. Some models, like the Granary Smart Camera Feeder, have a built-in camera that lets you see your pet in real-time and receive notifications when they eat. This is particularly helpful if you're away from home.

• If the feeder jams, unplug it, remove the hopper, and clear any blockage.
• Set up notifications in the app to get alerts for low food levels or missed meals.

Step-by-Step Setup Checklist

1. Unbox and inspect: Remove all components and check for damage. Keep the manual handy. Confirm all parts are present before starting.
2. Download the Petlibro app: Install the app, create an account, and log in. Use a strong password and enable notifications.
3. Connect to Wi-Fi: Place the feeder near the router, plug it in, and follow the app's pairing instructions. Ensure you're on 2.4GHz. If pairing fails, reset the feeder and try again.
4. Fill the hopper or tray: Add dry kibble or insert the wet food tray. Use a desiccant bag for dry food. Don't overfill to avoid jams.
5. Schedule meals in the app: Set times and portion sizes. For Granary 2, enable AI recognition if needed. Start simple and adjust as needed.
6. Test the feeder: Use manual feed to dispense a small amount and verify it works. Monitor the first few feedings to ensure everything runs smoothly.

Product Facts

• Polar Smart Wet Food Feeder For Pets: Introducing the first-of-its-kind refrigerated wet food feeder, offering unparalleled freshness for up to 3 days. Featuring semiconductor cooling technology, smart app control, innovative Paw Shield design, anti-pinch infrared sensor, and pest-proof, easy-to-clean components. If your pet eats wet food, this feeder keeps meals fresh for up to 3 days without spoilage, and the app control lets you schedule feedings just like the Granary dry feeder.
• Granary Smart Camera Feeder for pet: The built-in 1080p HD camera with infrared night vision helps to monitor your pet's diet all day. Stay on top of your pet's mealtime with the smart app notifications of PETLIBRO Granary Camera Feeder. Create personalized feeding schedules on the app to suit your pet's nutritional needs, promoting a healthier diet. For owners who travel or work long hours, the camera and notifications let you check on your pet and confirm they're eating on schedule, even at night.
• Granary 2 Series: Track intake with gram-level precision, monitor meals via HD camera, and personalize feeding for up to 10 cats with AI recognition. No collar needed. Granary 2 series delivers complete insights for every pet at every meal. If you have multiple cats, the Granary 2's AI recognition identifies each pet without collars, so you know exactly who ate and how much—perfect for managing different dietary needs.

With these steps, your Granary Smart Feeder with dual bowl will be up and running in no time. Remember to check the app regularly for feeding alerts and keep the feeder clean to ensure longevity. If you run into any issues, the Petlibro app's support section is a good first stop.